Ethentic Ethentic Higher Safety Higher Safety Chipmunk Data Chipmunk Data
  • Higher Safety Higher Safety Chipmunk Data Chipmunk Data Ethentic Ethentic

    STANDARD FOR SELECTING CDM PRINCIPAL DESIGNERS

    BSI publishes specification for procuring all CDM 2015 services

    The National Standards Body for the United Kingdom, BSI has published PAS 91:2013+A1:2017 for application across the UK.

    The new free to download standard covers, for the first-time, the engagement of those design organisations to be appointed by the project client as Principal Designers under the CDM Regulations 2015.

    CDM 2015 requires that design and contractor organisations appointed to work on a construction project must have the necessary skills, knowledge and experience and organisational capability to fulfil the role that they are appointed to undertake.

    The client responsible for appointing the design and contractor organisations must take reasonable steps to satisfy themselves that those parties have the necessary skills etc.

    The standard sets out the core health and safety related questions to be asked by CDM 2015 construction project clients and the evidence required to be satisfied that those appointed possess the necessary skills, knowledge, experience and organisational capability to carry out the Principal Designer function.

    Successful prior assessment can reduce bureaucracy

    The new PAS 91 provides for acceptance by clients of relevant successful assessments by registered members of the Safety Schemes in Procurement Forum (SSIP), against the PAS sections which covers health and safety questions only.

    To help reduce cost and bureaucracy client compliance with PAS 91 includes acceptance of relevant, successful assessments by an SSIP registered member scheme in lieu of responses to the H&S question. This enables the clients to give additional attention to project-specific health and safety questions.

    PAS 91 states that the Health and Safety Executive (HSE) supports SSIP, noting that suitable assessment of a supplier by an SSIP member assessor meets the client general requirement to exercise “reasonable judgment” based on the evidence provided.

    However, using an SSIP member-assessed scheme, or adopting PAS 91, does not remove client responsibility to ensure that a supplier is indeed “SSIP member assessed” and to enquire (as necessary) about the supplier’s health and safety capability to carry out specific projects.

    Further Information

    We have published further information designed to support Clients, Designers and Principal Designers in meeting their duties under CDM Regulations 2015.

     

    Latest Construction Health and Safety News

    BUILDING MATERIALS FIRM FINED OVER FATALITY

    Failure to effectively isolated power to machinery caused death of engineer

    Read the rest of this article »

    Posted on 10th October 2019

    CUSTOM AND PRACTICE CAUSED EXPLOSION DEATHS

    Electrical accumulator explosion claims the lives of two engineers

    Read the rest of this article »

    Posted on 10th October 2019

    REBAR FELL DURING TANDEM FLT LIFTING OP

    Workman seriously injured during improperly planned and executed lift

    Read the rest of this article »

    Posted on 10th October 2019

    FIRM FINED AFTER FINGER OF TRAINEE SEVERED

    Young worker injured hand working on unguarded rip saw

    Read the rest of this article »

    Posted on 8th October 2019

    WORKMAN FELL THROUGH ROOF OPENING

    Contractor failed to provide collective edge protection or fall arrest

    Read the rest of this article »

    Posted on 7th October 2019

    HSE ENFORCEMENT DATABASE LATEST UPDATE

    hselogo1View current online register of HSE prosecutions and enforcement notices

    Read the rest of this article »

    Posted on 6th October 2019

    DRIVER UNDER TRAINING CRUSHED BY TELEHANDLER

    Court sentences company director to unpaid work community order

    Read the rest of this article »

    Posted on 30th September 2019

    DIRECTOR IN DOCK OVER FRAGILE ROOF RISK

    Roofing contractor and director failed to plan and manage falls risk

    Read the rest of this article »

    Posted on 30th September 2019

    HSE START PROJECT HEALTH RISK INTERVENTIONS

    Regulator set to check health risks assessed and controls in place

    Read the rest of this article »

    Posted on 30th September 2019

    AIF NATIONAL WORKING AT HEIGHT CONFERENCE

    HSE Construction Head to speak at Access Industry Forum conference

    Read the rest of this article »

    Posted on 23rd September 2019

    NEW HSE HAVS CALCULATOR TO HELP CONTROL RISK

    New calculator includes “cautious estimates” for common tools

    Read the rest of this article »

    Posted on 23rd September 2019

    JAIL TERM FOR DIRECTOR OVER LORRY CRANE DEFECTS

    Operator impaled on dangerous and uninspected lifting appliance

    Read the rest of this article »

    Posted on 23rd September 2019

    STEEL PIPE FALL TRIGGERS FREAK CAUSE OF DEATH

    Wooden bearer sent flying by pipe struck workman on head

    Read the rest of this article »

    Posted on 16th September 2019

    FATAL FALL FROM INSECURE SCAFFOLD LADDER

    Scaffold erected by unqualified and incompetent person

    Read the rest of this article »

    Posted on 16th September 2019

    FIRMS FAILED TO MONITOR SAFE SYSTEM OF WORK

    Principal Contractor and specialist fined over fall through roof mesh

    Read the rest of this article »

    Posted on 12th September 2019

    ASSISTANCE FROM THIRD PARTY PROVES COSTLY

    Contractor fined after non-employee loses fingers crushed by dozer

    Read the rest of this article »

    Posted on 12th September 2019

    CUSTODIAL SENTENCES AFTER CAPTURE ON CAMERA

    Roofing business partner failed to properly plan and supervise roofwork

    Read the rest of this article »

    Posted on 12th September 2019

    FIRM FINED OVER FALL FROM LORRY BED

    Serious injury after failure to provide suitable and clear instructions

    Read the rest of this article »

    Posted on 10th September 2019

    COUNCIL FINED £100k OVER VIBRATION FAILINGS

    Excessive use of power tools uncontrolled and without health surveillance

    Read the rest of this article »

    Posted on 10th September 2019

    IMPROVING CDM DESIGNER HAZARD AWARENESS

    Research explores power of “multi-media digital tool” for design hazards

    Read the rest of this article »

    Posted on 27th August 2019

    DEMOLITION FEDERATION ON RECENT INCIDENTS

    NFDC ‘statement of awareness’ follows unplanned collapses

    Read the rest of this article »

    Posted on 27th August 2019

    RAISING COMPETENCE AND MAKING BUILDINGS SAFER

    Life-safety-critical disciplines urged to act on Interim Report

    Read the rest of this article »

    Posted on 27th August 2019

    BUILDING WORKS COMPROMISED GAS SAFETY

    Company and director fined after work created risk to residents

    Read the rest of this article »

    Posted on 27th August 2019

    NON-INJURY PROSECUTION OVER WORK ON THE EDGE

    HSE routine inspection results in £25,000 fine for errant contractor

    Read the rest of this article »

    Posted on 27th August 2019

    FALL PRECAUTIONS FELL BETWEEN TWO FIRMS

    Contractors fined after workers at risk of falling from roof

    Read the rest of this article »

    Posted on 9th August 2019
    Ethentic Ethentic Higher Safety Higher Safety Chipmunk Data Chipmunk Data
  • Higher Safety Higher Safety Chipmunk Data Chipmunk Data Ethentic Ethentic