HSE FLOOR SELECTION ‘TOOL’ FOR CDM 2007 DESIGNERS
Online ‘tool’ designed to help identify appropriate flooring in workplaces
HSE has launched a Flooring Selection Tool designed to help identify types of flooring for installation in new or refurbished workplaces that are likely to retain their slip resistant properties when contaminated with some common liquids. The tool comes with the caveat that “flooring can lose its slip resistance properties depending on how well the floor is installed, maintained and treated.”
Use of the tool is ‘optional’ and aims to help “designers, architects and employers who are working on new-build or refurbishment projects” to address slips and trips which are are the biggest cause of reported major injuries to workers.
The Workplace (Health, Safety and Welfare) Regulations 1992 require employers to provide floors which are suitable for workers to use safely.
An employer may also be the client for construction work. If clients make decisions regarding the preparation of, or modification of, a design for flooring they may fall within the definition of a designer and take on the relevant responsibilities under CDM 2007.
Latest Construction Health and Safety News
CONSTRUCTION SAFETY NEWS – END OF NEW CONTENT
The addition of content on this website ceased on 17th April 2020.
Material posted before this date can be found by clicking on our SEARCH NEWS DATABASE function.
CDM REGULATIONS 2015: GUIDES AND TEMPLATES
Summary of our advice and tools to aid CDM 2015 compliance
Read the rest of this article »
Posted on 21st April 2020HSE WARN OF NEED FOR RPE FACE FIT TEST AND CHECK
Incorrectly fitted RPE will not protect the wearer from dangers to health
Read the rest of this article »
Posted on 16th April 2020CORONA VIRUS: LATEST SITE OPERATING PROCEDURES
Industry Bodies publish risk management guidance Version 3
Read the rest of this article »
Posted on 15th April 2020TOWER CRANE OUT OF SERVICE SAFETY ALERT
Important advice from Construction Plant-hire Association and HSE
Read the rest of this article »
Posted on 30th March 2020HSE PLAN AND CONSTRUCTION PRIORITIES 2020/21
Appointed CDM 2015 Principal Designers remain focus of HSE inspections
Read the rest of this article »
Posted on 30th March 2020COVID-19 ADVICE & GUIDANCE FOR CONSTRUCTION
BuildUK support industry with advice, guidance and information
Read the rest of this article »
Posted on 30th March 2020HSE TARGETING WELDING FUME CANCER RISK
Inspections to enforce improved controls required by new risk evidence
Read the rest of this article »
Posted on 24th February 2020HSE TO OVERSEE NEW BUILDING SAFETY REGIME
Government to deliver biggest change in building safety for a generation
Read the rest of this article »
Posted on 21st January 2020FESTIVE GREETINGS TO ALL OUR READERS
Read the rest of this article »
SELECTED NEWS POSTED RECENTLY ON TWITTER
![PP Construction Safety logo and link to home page [1]](https://www.ppconstructionsafety.com/wp-content/themes/ppcs960/images/ppcslogo.jpg)
Links to other construction health and safety related news reports
HSE LOOK TO LOCAL AUTHORITIES FOR CDM SUPPORT
Council Inspectors focus on CDM client duties – asbestos, fragility and RCS
Read the rest of this article »
Posted on 14th November 2019HSE WELDING FUME REVISED GUIDANCE PUBLISHED
New research evidence on cancer link prompts revision on welding fume
Read the rest of this article »
Posted on 14th November 2019STRUCTURAL SAFETY BODY LATEST NEWSLETTER
CROSS publishes reports and expert comment on a range of issues
Read the rest of this article »
Posted on 18th October 2019HSE RISK REDUCTION THROUGH DESIGN AWARD
Regulator seeks to promote hazard avoidance and risk minimisation
Read the rest of this article »
Posted on 18th October 2019HSE START PROJECT HEALTH RISK INTERVENTIONS
Regulator set to check health risks assessed and controls in place
Read the rest of this article »
Posted on 30th September 2019AIF NATIONAL WORKING AT HEIGHT CONFERENCE
HSE Construction Head to speak at Access Industry Forum conference
Read the rest of this article »
Posted on 23rd September 2019NEW HSE HAVS CALCULATOR TO HELP CONTROL RISK
New calculator includes “cautious estimates” for common tools
Read the rest of this article »
Posted on 23rd September 2019IMPROVING CDM DESIGNER HAZARD AWARENESS
Research explores power of “multi-media digital tool” for design hazards
Read the rest of this article »
Posted on 27th August 2019DEMOLITION FEDERATION ON RECENT INCIDENTS
NFDC ‘statement of awareness’ follows unplanned collapses
Read the rest of this article »
Posted on 27th August 2019RAISING COMPETENCE AND MAKING BUILDINGS SAFER
Life-safety-critical disciplines urged to act on Interim Report
Read the rest of this article »
Posted on 27th August 2019BUILDING WORKS COMPROMISED GAS SAFETY
Company and director fined after work created risk to residents
Read the rest of this article »
Posted on 27th August 2019HSE SPEAK AT ACCESS INDUSTRY CONFERENCE 2019
AIF National Working at Height Conference November 2019
Read the rest of this article »
Posted on 6th August 2019STRUCTURAL SAFETY BODY LATEST NEWSLETTER
CROSS publishes reports and expert comment on a range of issues
Read the rest of this article »
Posted on 23rd July 2019CONSIDERING TEMP WORKS IN PERMANENT DESIGN
Useful overview for civil and structural engineers on contemporary practice
Posted on 23rd July 2019
