Ethentic Ethentic Higher Safety Higher Safety Chipmunk Data Chipmunk Data
  • Higher Safety Higher Safety Chipmunk Data Chipmunk Data Ethentic Ethentic

    FALLING TRUSS TRIGGERED DOMINO EFFECT

    Four workers injured when roof trusses collapsed

    DP Designs Ltd has been sentenced for safety failings after four workers were injured when a roof truss in a new extension collapsed during construction causing several others to fall at premises in Coventry on 26 June 2014.

    One man was trapped by his legs, two suffered minor injuries and the fourth, suffered a fracture to his lower spine which led to many painful months off work.

    Nuneaton Magistrates heard (Monday 15 June) that DP Designs Ltd was principal contractor for the project and that due to an omission during the planning and procurement process a critical structural truss had been overlooked. This led to the workers attempting to install the trusses in an unstable manner

    The workers realised it was an issue they stopped working in that area. However, the following day, one of the trusses moved causing a domino effect as several other trusses collapsed above the area where the men were currently working.

    The investigation found that had the work been properly planned, organised and monitored the collapse would not have occurred. Also, if appropriate fall prevention measures had been implemented correctly, the outcome would have been less severe.

    Company had a duty to inform those affected

    DP Designs Ltd, of Bromsgrove, Worcestershire, was fined a total of £24,000 and ordered to pay costs of £1,106.15 after pleading guilty to two offences, one breach of Regulation 25(1) of the Construction (Design and Management) Regulations 2007 and the other a breach of Regulation 6(3) of the Work at Height Regulations 2005.

    After the case, HSE Inspector Chris Gregory, said:

    “As the principal contractor DP Designs Ltd should have ensured the roof truss installation was properly planned, appropriately supervised and, above all, safe.

    The company had a duty to inform those, who may be affected, of any changes to the plan that may impact on their work, in this case the company failed to inform workers of changes that led to the structure becoming unstable.

    Where work at height is involved, companies should also provide suitable measures to prevent falls and, secondly, provide equipment to mitigate the outcome of any falls. However, as a result of the DP Design Ltd’s failings, four men were injured.”

    Latest Construction Health and Safety News

    HSE ENFORCEMENT WEEKLY UPDATE 17th OCT 2018

    hselogo1Prosecutions and enforcement notices register latest version

    Read the rest of this article »

    Posted on 18th October 2018

    YOUNG WORKER FELL FROM PETROL STATION CANOPY

    Steel fabricator after young construction worker falls on first day at work

    Read the rest of this article »

    Posted on 18th October 2018

    FIRM FINED OVER FAILURE AT ASSESS VIBRATION RISK

    Vibration regulations not acted upon until seven years in operation

    Read the rest of this article »

    Posted on 18th October 2018

    FAILURE TO ISOLATE LEAVES WORKMAN PARALYSED

    Conveyor guards removed before power source isolated

    Read the rest of this article »

    Posted on 16th October 2018

    TRADING STANDARDS AND HSE ACT IN CONCERT

    Director given prison term over fraud and health and safety breaches

    Read the rest of this article »

    Posted on 15th October 2018

    BUILDER ERROR CAUSED FALL OF RESIDENT

    Director prosecuted over refurb project danger to others

    Read the rest of this article »

    Posted on 12th October 2018

    FORMER HSE BOSS CONDEMNS VALUE ENGINEERING

    Resident and public safety must match workforce safety progress

    Read the rest of this article »

    Posted on 12th October 2018

    RETAILER FINED AFTER FAN AMPUTATES FINGERS

    Maintenance engineer injured during roof fan repair works

    Read the rest of this article »

    Posted on 12th October 2018

    POOR PLANT ISOLATION CAUSED CONVEYOR DANGER

    Arm of fitter trapped between conveyor drum and belt

    Read the rest of this article »

    Posted on 11th October 2018

    BUILDING OWNER FAILED TO CHECK FOR ASBESTOS

    Prison sentence for businessman after previous HSE enforcement

    Read the rest of this article »

    Posted on 11th October 2018

    YOUNG WORKER LOSES FINGERS IN SAWING INCIDENT

    Provision of training and information could not be proved

    Read the rest of this article »

    Posted on 11th October 2018

    MD PROSECUTED ALONGSIDE ERRANT COMPANY

    Director held personally responsible for poor site conditions

    Read the rest of this article »

    Posted on 1st October 2018

    ASBESTOS REMOVAL STARTED BEFORE R & D SURVEY

    Asbestos insulation board found outside building being refurbished

    Read the rest of this article »

    Posted on 27th September 2018

    INEFFECTIVELY BRAKED SAW CAUSED AMPUTATIONS

    Retro-fitting of precautions may be required on older machines

    Read the rest of this article »

    Posted on 27th September 2018

    FALL THROUGH FRAGILE CEILING TILES

    Failure to implemented control measures for working near fragile surfaces

    Read the rest of this article »

    Posted on 27th September 2018

    HSE SEEKS CONSTRUCTION ‘DUST BUSTER’ PARTNERS

    Regulator uses social media to raise dust dangers and using right controls

    Read the rest of this article »

    Posted on 24th September 2018

    MAJOR HOMES BUSINESS EXPOSED PUBLIC TO RISK

    Residential property refurb project created carbon monoxide danger

    Read the rest of this article »

    Posted on 24th September 2018

    HSE CONSTRUCTION DUST CONTROL ‘BLITZ’ STARTS

    Regulator inspections will check health taken as seriously as safety

    Read the rest of this article »

    Posted on 20th September 2018

    FLOOR CONSTRUCTION SYSTEM OF WORK UNSAFE

    Welder fell 3m from mezzanine area through purlin openings

    Read the rest of this article »

    Posted on 20th September 2018

    WORKER SUFFERS FATAL BURNS IN OXYGEN RICH AREA

    Sparks from angle grinder ignited clothing of workman in confined space

    Read the rest of this article »

    Posted on 19th September 2018

    RIBA PUBLISH DRAFT POST GRENFELL FIRE SAFETY PLAN

    Architects institute consults on ‘golden thread of fire safety information’

    Read the rest of this article »

    Posted on 19th September 2018

    MAJOR UK CONTRACTORS HIT BY MAJOR FINES

    Firms ordered to pay over £3m after foot trapped in rotating ‘screw’

    Read the rest of this article »

    Posted on 19th September 2018

    DRIVER DIED TRAPPED BETWEEN TRAILER AND VEHICLE

    Firm fined £1.5 million over failure to assess coupling operations

    Read the rest of this article »

    Posted on 14th September 2018

    ACTUAL SYSTEM OF WORK WAS OPPOSITE OF RAMS

    Workman fell 4m through fragile asbestos roof sheet

    Read the rest of this article »

    Posted on 13th September 2018

    CDM PRINCIPAL DESIGNER FUNCTION MISUNDERSTOOD?

    Consultants claim CDM 2015 design risk management has ‘gone backwards’

    Read the rest of this article »

    Posted on 8th September 2018
    Ethentic Ethentic Higher Safety Higher Safety Chipmunk Data Chipmunk Data
  • Higher Safety Higher Safety Chipmunk Data Chipmunk Data Ethentic Ethentic