• Total Access Higher Safety
    Turner Access Chipmunk Data

    NEW RPE FILTER MAKES FACE FIT TESTING EASIER

    FFT in under 3 seconds with JSP PressToCheck™ filters

    JSP has launched a half-mask respiratory protection with Press To Check™ P3 R D filters which enable “the fit of the respirator to be checked in under 3 seconds with 3 simple steps”

    The reusable filters have extremely low breathing resistance. Air flows fully across the enclosed, pleated filters which resist clogging in extreme fine dust environments and they exceed the standard EN143 P3 requirements, also passing the enhanced “Dolomite” very fine dust test.

    PressToCheck™ filters are quickly and securely attached to the Force 8 mask which uses Typhoon™ valve technology giving the “most efficient exhale performance of respirators on the market”.

    HSE Information Sheet 36 Construction Dust requires RPE with an Assigned Protection Factor of 20 (ie FFP3 filtration levels) is used for many common high risk construction tasks.

    JSP state that:

    “Press To Check™ is a massive step forward in assisting Health and Safety Officers achieve their goals of ensuring respirators are correctly worn each and every time. Using JSP Press To Check™ filters means daily face-fit reassurance for all.”

    Face-fitting testing is a pre-requisite for tight-fitting masks.

     

    Turner Access Chipmunk Data
    Total Access Higher Safety