![PP Construction Safety logo and link to home page [1]](http://www.ppconstructionsafety.com/wp-content/themes/ppcs960/images/ppcslogo.jpg)
HIGH REACH DEMOLITION SECTOR GUIDE UPDATED
New training course supplements revised and updated high reach Guidance
The National Federation of Demolition Contractors (NFDC) has launched a revised and updated edition of the existing Guidance Notes on the Safe Use of High Reach Demolition Excavators. The publication has been produced by NFDC in conjunction with all the leading high reach excavator manufacturers reflecting changes in the high reach demolition sector over the past five years. The co-author and industry expert Paul Brown said:
“Since we published the original document, we have seen high reach machines go beyond the 60, 70 and even 90 metre working height mark. It was important that the guidance was brought up to date to reflect those changes.”
Free hard copies are available to UK contractors using the NFDC Publications order form and the electronic version can be viewed online
Guidance sets out checks required to ensure stable and secure base
The National Demolition Training Group has developed a high reach excavator training course designed to take an operator experienced on a machine with a 15m working height up to 30m.
NFDC CEO Howard Button said:
“with publication of the revised guidance notes and the introduction of the new training course, the NFDC and NDTG are ensuring that the UK demolition sector keeps pace with the rapid development of these highly specialised machines.”
He added:
“There is probably no faster-moving area of the demolition business than the development of high reach excavators. These huge machines are potentially dangerous and require enormous care when operating them safely.
Unseen voids and hidden basements are probably the biggest threat to high reach safety. The new guidance sets out the checks required to ensure the machine is working on a stable and secure base.”
Latest Construction Health and Safety News
HSE CONSTRUCTION DUST CONTROL ‘BLITZ’ STARTS
Regulator inspections will check health taken as seriously as safety
Read the rest of this article »
Posted on 20th September 2018FLOOR CONSTRUCTION SYSTEM OF WORK UNSAFE
Welder fell 3m from mezzanine area through purlin openings
Read the rest of this article »
Posted on 20th September 2018WORKER SUFFERS FATAL BURNS IN OXYGEN RICH AREA
Sparks from angle grinder ignited clothing of workman in confined space
Read the rest of this article »
Posted on 19th September 2018RIBA PUBLISH DRAFT POST GRENFELL FIRE SAFETY PLAN
Architects institute consults on ‘golden thread of fire safety information’
Read the rest of this article »
Posted on 19th September 2018MAJOR UK CONTRACTORS HIT BY MAJOR FINES
Firms ordered to pay over £3m after foot trapped in rotating ‘screw’
Read the rest of this article »
Posted on 19th September 2018HSE ENFORCEMENT WEEKLY UPDATE 19th SEPT 2018
Prosecutions and enforcement notices register latest version
Read the rest of this article »
Posted on 19th September 2018DRIVER DIED TRAPPED BETWEEN TRAILER AND VEHICLE
Firm fined £1.5 million over failure to assess coupling operations
Read the rest of this article »
Posted on 14th September 2018ACTUAL SYSTEM OF WORK WAS OPPOSITE OF RAMS
Workman fell 4m through fragile asbestos roof sheet
Read the rest of this article »
Posted on 13th September 2018CDM PRINCIPAL DESIGNER FUNCTION MISUNDERSTOOD?
Consultants claim CDM 2015 design risk management has ‘gone backwards’
Read the rest of this article »
Posted on 8th September 2018RISK ASSESSED PRECAUTIONS NOT IMPLEMENTED
Action not paperwork essential to prevent fall during lifting operation
Read the rest of this article »
Posted on 7th September 2018CROSSRAIL PUBLISH BEST PRACTICE H&S GUIDES
Sharing major project best practice can leave a lasting legacy
Read the rest of this article »
Posted on 5th September 2018SCHOOL STAFF LACKED ASBESTOS AWARENESS TRAINING
Council fined £200k over asbestos flue and gasket rope failures
Read the rest of this article »
Posted on 5th September 2018INCIDENT: MEWP OVERTURN IN CITY CENTRE
Images show aftermath of mobile elevating platform collapse
Read the rest of this article »
Posted on 5th September 2018SAFETY ALERT: DEFECTIVE SCAFFOLD COUPLER
National Access and Scaffolding Confederation issues warning
Read the rest of this article »
Posted on 31st August 2018DEMOLISHING INTERNAL WALL REVEALED ASBESTOS
Firm lacked survey and asbestos management plan for premises
Read the rest of this article »
Posted on 31st August 2018NEW HEALTH AND SAFETY TEST FOR ARCHITECTS
RIBA raise the bar for members on design risk management and ‘life safety’
Read the rest of this article »
Posted on 31st August 2018POWER BUSINESSES FAILED ON LIFTING OPERATION
Panel fell on workman during turbine maintenance project
Read the rest of this article »
Posted on 31st August 2018MAJOR INFRASTRUCTURE FIRM COMMITS TO ZERO HARM
Behaviours to deliver zero lost time injury incident rate by 2021
Read the rest of this article »
Posted on 31st August 2018MANAGING TOWER CRANE FALLING OBJECT RISK
CPA issues new technical information note
Read the rest of this article »
Posted on 31st August 2018POST EXPLOSION ASBESTOS WORK WAS UNSAFE
Asbestos cement panels removed and cut with power tools
Read the rest of this article »
Posted on 31st August 2018FALL THROUGH UNFLOORED FACTORY ROOF SPACE
Non-routine tasks require assessment and clear risk controls
Read the rest of this article »
Posted on 31st August 2018SEVENTH LONDON CYCLIST DEATH DURING 2018
Building products vehicle involved in death of Queens doctor
Read the rest of this article »
Posted on 17th August 2018MAJOR CONTRACTOR FAILED TO SUPERVISE LIFT
Errors whilst lifting pre-cast concrete blocks fined £600,000
Read the rest of this article »
Posted on 14th August 2018FIRM FINED £400,000 OVER VIBRATING TOOLS RISK
Hand-held orbital sanders, rivet guns, grinders and drills caused harm
Read the rest of this article »
Posted on 14th August 2018OVERHEAD POWER AND EARTHING OF SCAFFOLDS
NASC combines updates advice on scaffold electrical risks
Posted on 9th August 2018
